UDG-60: UDG-60 Universal Drills & Taps Grinder (Dia.2-60mm)

Description

Features:
I. There are two types of grinding wheels (5A & 12A) on wheel head of UDG-60. The end & chisel edge can be ground without changing the grinding wheel.

II. For dressing grinding wheel, set the diamond dresser on the chuck. Adjust the chuck grinding angle and reciprocating feed of the wheel head. The wheel motor can be adjusted 160mm vertically and rotate 1800. It can increase the function of machinery.

III. Adopt the precision awl type chuck. It can clip stably. At the same time, it can grind the cutting edge and web thickness of drills in one set-up. The both sides of drill angle and the edge length are equal. It could keep the accuracy of the center of drill without offset.

IV. Easy operation, grind fast and precisely.

Specification:

Type Grinding

Grinding Capacity f 2-60mm

Longitudinal Travel of Table 240mm

Horizontal Travel of Table 180mm

Vertical Adjustment of Wheel Head 160mm

Clearance Angle of Drill 0⁰~18⁰

Point of Angle 40⁰~180⁰

Size of Wheel 180x19x31.75mm, 180x32x31.75mm

Speed of Wheel 50HZ 2800rpm, 60HZ 3360rpm

Horse Power/ Voltage 1HP ; 220V/380V/415V

Net Weight/ Gross Weight 240 / 310 kgs

Packing Size (LxWxH) 100x95x156cm

Standard Accessories:
1. General Grinding Wheels (type 5A & type 12A) 2 pcs

2. Grinding Wheel Flange 1 set

3. Wheel Dresser 3 pcs

4. Work Light 1 pc

5. Tool for General Use 1 pc

6. Morse Taper Sleeves No. 3, 4, 5 3pcs.

7. Cam No.4 for drill grinding 1 pcs

8. Cam No.6 for drill & step drill grinding 1 pc

9. Cam No.8 for 4 flutes tap grinding 1 pc

10. Cam No.9 for 3 flutes tap & 3 flutes counter sink grinding 1 pc

11. Cam No. A2 for one flute counter sink grinding 1 pc

12. Chuck Handle 1 pc

13. Flange Wrench 1 pc

14. Work Cabinet 1 pc
OPTIONS:

1. Cooling System

2. Auto cycle motor

L*W*L(CM):112*100*156 N.W: 320 KGS G.W: 390 KGS