TDB , RADIUS & ANGLE DRESSER

Description

Description

Radius and Angle Dresser
Radius and Angle Dresser

Main Features

1. Positive setting of the diamond to absolute center with the special gage included with the dresser.;
2. Simple, fast, accurate radius setting; no height gage or other set-up aids required.
3. Radius is set on the grinder by measuring over the two pins or by inserting a gage block,as shown, for direct reading. 4. Inside or outside radius is determined
simply by sliding the dowel pin to the right for concave and to the left for convex.;
5. 4x90o graduation in full 360o circle. 6 minute vernier reading.
6. Chrome plated.;
7. One push-pull type knob for radius and angle control and for safer and faster operations.;
8. Accuracy. Extremely close tolerances are held in the manufacture of this tool, assured by hardening and precision grinding of all critical parts.
9. Ways are chrome hardened.;
10. Economy.
11. Set-up and dressing time reduced to a
bare minimum due to simplicity.

Part Number :TDB

Max. Wheel Diameter Stand	10"
Internal Radii	5/8~1-5/8 inch
with Rat-Tail Adapter	1/32~1-5/8 inch
External Radii	0~1-5/8 inch
Height from Base to Center	4-3/32 inch
Tangent travel/either side of center	1-5/8 inch