DS-010: DS-010 , DIAMOND NIP 1/4'X2'0.2CT for the FC-350 Punch Former
Part Number: DS-010
Our Price: $40.00
Description
Description
DS-010: DIAMOND NIP 0.375'X2' 0.2CT for the Wheel Parallel Dresser
Main Features
1. Positive setting of the diamond to absolute center with the special gauge included with the dresser.;2. Simple, fast, accurate radius setting; no height gage or other set-up aids required.
3. Radius is set on the grinder by measuring over the two pins or by inserting a gage block,as shown, for direct reading.
4. Inside or outside radius is determined simply by sliding the dowel pin to the right for concave and to the left for convex.;
5. 4x90 degree graduation in full 360-degree circle. - minute vernier reading.
6. Chrome plated.;
7. One push-pull type knob for radius and angle control and for safer and faster operations.;
8. Accuracy. Extremely close tolerances are held in the manufacture of this tool, assured by hardening and precision grinding of all critical parts.
9. Ways are chrome hardened.;
10. Economy.
11. Set-up and dressing time reduced to a bare minimum due to simplicity.