Features:
I. For dressing grinding wheel, set the diamond dresser on the chuck and adjust the chuck grinding angle and reciprocating feed of the wheel head. The wheel motor can be adjusted 160mm vertically and rotate 1800
. It can increase the function of machinery.
II. Adopts the precision awl type chuck. It can clip stably. At the same time, it can grind the cutting edge and web thickness of drills in one set-up. The both sids of drill angle and the edge length are equal. It could keep the accuracy of the center of drill without offset.
III. Easy operation, grind fast and precisely.
Specification:
Type Grinding
Grinding Capacity f5mm~f100mm
Longitudinal Travel of Table 245mm
Horizontal Travel of Table 180mm
Vertical Adjustment of Wheel Head 160mm
Clearance Angle of Drill 00~180
Point Angle of Drill 400~1800
Size of Wheel 180x50x31.75mm
Speed of Wheel 50HZ 2800RPM, 60HZ 3360RPM
Horse Power/ Voltage 1HP (750W)
Net Weight/ Gross Weight 305KGS / 365KGS
Packing Size (LxWxH) 112x100x154CM
Standard Accessories:
1. Grinding Wheels (Type:7A ) 1 pcs
2. Grinding Wheel Flange 1 set
3. Wheel Dresser 3 pcs
4. Work Light 1 pc
5. Tool for General Use 1 pc
6. Morse Taper Sleeves No. 3, 4, 5,6 4pcs.
7. Cam No.4 for drill grinding 1 pcs
8. Cam No.6 for drill & step drill grinding 1 pc
9. Cam No.8 for 4 flutes tap grinding 1 pc
10. Cam No.9 for 3 flutes tap & 3 flutes counter sink grinding 1 pc
11. Cam No. A2 for one flute counter sink grinding 1 pc
12. Chuck Handle 1 pc
13. Flange Wrench 1 pc
14. Work Cabinet 1 pc
15. Auto cycle motor 1 pc
16. Cooling System 1 pc
Packing : L*W*H(CM):100*95*156 N.W: 270 KGS G.W:330 KGS
cart (0)
